36
DRy MOUNTING pAsTE
DRy MOs2
LUBRICATION
Dry MOs 2 lube is a high load mounting paste that facilitates the
pressing and mounting of details. Its main components are molybde-
nite and additives. Due to the aforementioned ingredients the prod-
uct, when dried, withstands extreme loads, wide temperature range,
reduces wearing of friction surfaces considerably and stays very well
on the surface. As the product dries fast, it is an ideal lubricating solu-
tion also in a dusty environment.
The dried product can be cleaned off the surface only with special
solvents or mechanically.
GENERAL INFORmATION
Base substances
molybdenite, Ep additives
Colour
dark grey
Odour
typical
Temperature resistance
-190 ºC up to +340 ºC
Load resistance
up to 6900kg/cm²
Corrosion resistance
low
density
1g/ml
TEChNICAL INFORmATION
INsTRUCTIONs FOR UsE
PROdUCT ANd ACCEssORIEs
PROdUCT
PACKAGE
COdE
shORT COdE
PROdUCT GROUP
EAN COdE
DRy MOs2
400ml
NBQ209040
l80
lubrication
4742628000777
• withstands high loads
• Fast drying
• stays well on surface
• Temperature resistance
-190 ºC up to +340 ºC
Dry MOs 2 lube is suitable for assembly and disassembly of shafts, bushings and bearings,
and for lubricating various sliding surfaces.
Those places of use are usually characterized by extreme load, precise seat, wide range of
working temperature and high volume of dust or dirt.
APPLICATIONs
• Temperature range for storing, transportation and use is +5 ºC up to +45 ºC.
• shake the aerosol very thoroughly before use.
• Make sure before spraying that the surface is clean.
• If necessary, clean the surface with Brake Clean.
• spray the product evenly on the surface from 25 cm distance.
• The product can be sprayed only if the aerosol is held in upright position.
• Minimal drying time before assembly at 20 C is 5 minutes. If necessary, polish the surface
with soft cloth before assembly.
