71
sTRONG DOUBlE-sIDED TRANspARENT ADHEsIVE TApE
sTRONG TApE TRANspARENT
TAPEs
strong Tape Transparent is a transparent, strong, double-sided
purely acrylic adhesive tape meant for strong bondings in inside
and outside conditions. strong Tape Transparent has excellent
adhesion to various materials and has great resistance to high-
er temperatures as well. The product has a very high bonding
strength and is highly water resistant.
GENERAL INFORmATION
Flexible fixing of different materials - wood, metal, aluminium, glass, PVC, plastics, etc.
NB!
Not suitable for bonding pE and pp plastics!
Basic components
acrylic adhesive, red pE protective liner
Colour
transparent
Temperature resistance
from -40 ºC to +90 ºC (short-time 4 hours up to +150 ºC)
solvent resistance
insoluble
drying time
30% of total strength in 20 min
Full cure
72h
maximum tensile strength
75N/cm²
Thickness
1,0mm
shelf life
12 months in sealed packaging
• high bonding strenght
• water and moisture proof
• Permanently flexible
• Transparent
TEChNICAL INFORmATION
APPLICATIONs
INsTRUCTIONs FOR UsE
PROdUCT ANd ACCEssORIEs
PROdUCT
PACKAGE
COdE
shORT COdE PROdUCT GROUP EAN COdE
sTRONG TApE TRANspARENT 6MM
1 roll
NBQ553006
T81
Tapes
–
sTRONG TApE TRANspARENT 12MM
1 roll
NBQ553012
T81
Tapes
–
AUxILIARY PROdUCTs
MUlTI ClEAN FOAM
500ml
NBQ480050
C20
Cleaning
4742628000548
GAsKET REMOVER
400ml
NBQ465040
C34
Cleaning
4742628001040
• Transport, store and use the product between the temperatures from +10 ºC to +30 ºC.
• The surfaces to be glued must be dry, clean and free from dust - clean the surfaces in
advance with Multi Clean Foam, if necessary.
• Remove the protective liner of the tape and press the tape strongly onto the material.
• Then join the surfaces and press evenly to achieve as good adhesion of the materials as
possible.
• The product achieves its initial gluing strength in 20 minutes and is completely dry after 72 hours.
• Heat treatment of the surfaces will speed up the drying time of the product.
• Dried tape can be removed with Gasket Remover.
NB!
In case of complex and silicone-based plastics, use a plastic primer in order to
achieve a better adhesion to the materials.
